Lubrication

How to oil a clock

Updated October 2026 ยท ChronoCrafter editorial teamHow-to
Quick answer

Clock oil goes in very small amounts on the pivots, where the wheel arbors turn in the plates, and on a few friction points. It does not go on the gear teeth. And it only helps a clean movement: oil added to old, dirty oil makes an abrasive paste.

Before you start: should you?

If the clock has not been cleaned in many years, or you can see dark, sticky residue around the pivots, don't oil it: book a cleaning. Oiling is maintenance for a movement that is already clean. On antique or valuable clocks, leave oiling to the clockmaker.

The right oil

Use oil made for clocks. Clock oils are designed to stay where they are put and not spread or evaporate. Sewing-machine oil, 3-in-1, motor oil and WD-40 are not substitutes. Clock oil is applied with a fine oiler (a needle-like tool), never from the bottle's spout.

Advertisement

Where the oil goes

  • Pivot holes: a drop small enough to fill the oil sink (the little cup around the hole) without overflowing.
  • Escapement: the pallet faces, sparingly; this is the point clockmakers treat most carefully.
  • Mainspring (spring clocks): greased when serviced, with the spring out of the barrel; not something done in place.
  • Not: wheel teeth and pinion leaves, which are meant to run dry; oil there collects dust.

Grandfather clocks

Most grandfather clock movements can be oiled through the case once the hood is off and the dial is accessible, but the back plate and escapement are awkward to reach without removing the movement. Weights and pendulum should be removed first. Many owners find it simpler to have the clockmaker oil the clock during a routine visit.

Questions

How often should a clock be oiled?

Commonly every few years on a clean movement in daily use; a full cleaning is needed less often but is the bigger job.

Is too much oil bad for a clock?

Yes. Excess oil runs out of the pivot hole, spreads over the plate and draws the remaining oil away from where it is needed.

Related

Find clock repair near you

Compare clockmakers by state and city, with the clocks they work on and whether they make house calls.