A grandfather clock is the one clock most people can't carry to a shop, so repair usually starts with a house call. The clockmaker checks the setup in your home, fixes what can be fixed on the spot and, if the movement needs a full service, takes only the movement back to the bench.
What a typical repair visit looks like
- Setup check. The clockmaker levels the case, checks that the pendulum hangs freely, that the weights are on the right hooks and that the cables or chains run cleanly on their pulleys.
- Beat and rate. An even “tick-tock” matters more than anything else. If the clock is out of beat it will stop within hours, even with a healthy movement.
- Movement inspection. With the hood off, the clockmaker looks for worn pivot holes, dried or dirty oil, a cracked suspension spring and frayed cables.
- Decision. Small faults are fixed in the house. A movement that is worn or dirty is removed and serviced at the workshop, which usually takes a few weeks.
- Return and setup. The serviced movement is reinstalled, set in beat, regulated and the chimes are synchronised with the hands.
Common grandfather clock faults
| What you notice | What it often means |
|---|---|
| Stops after a few hours or days | Out of beat, case not level, or a worn and dirty movement losing power |
| Chimes at the wrong time | Minute hand slipped on its arbor, or the chime train was let down out of sequence |
| Strikes the wrong hour | Hour hand moved independently of the strike; usually corrected by moving the hour hand |
| One weight drops faster than the others | That train is running or striking when it shouldn't, or a cable has jumped its drum |
| Loud clunk or a weight that fell | Broken cable or chain: stop winding and call a clockmaker |
| Gains or loses minutes every day | Pendulum needs regulating, or wear is changing the swing |
The grandfather clock troubleshooting guide walks through the checks you can safely do yourself before booking.
Clockmakers who do this
546 listings in 46 states mention grandfather clock work on their website, in their name or in customer reviews. States with the most:
Cable-driven, chain-driven and the movement inside
Most modern grandfather clocks are cable-driven: you wind them with a crank through holes in the dial. Older and some traditional clocks are chain-driven: you pull the chains to lift the weights. Both have three weights on a typical Westminster-chiming clock (time, strike and chime), one or two on simpler clocks.
Many clocks sold in the U.S. since the 1970s use German movements by makers such as Hermle, Kieninger or Urgos, behind brand names like Howard Miller, Ridgeway, Sligh or Colonial. The maker and model number are usually stamped on the back plate. Writing that number down before you call lets the clockmaker tell you whether parts or a replacement movement are available.
Overhaul, repair or replacement movement
A full overhaul means taking the movement apart, cleaning every part, repairing worn pivot holes (bushing), polishing pivots and reassembling with fresh clock oil. It is the right choice for antique movements and for good-quality modern movements with moderate wear.
When a mass-produced movement is badly worn, some clockmakers will quote a replacement movement of the same model instead. That keeps the clock running but replaces original parts, which matters if the clock is antique or valuable. Our repair-or-replace guide explains the trade-off.
Questions to ask when you book
- Do you make house calls in my area, and is the trip charged separately?
- Is the first visit a diagnosis only, or does it include basic adjustments?
- If the movement goes to the workshop, how long is the usual turnaround?
- Will you set the clock up again and is that included in the price?
- What warranty do you give on a movement overhaul?
Questions
Can a grandfather clock be repaired in the home?
Setup problems, beat, regulation and many chime faults can be fixed in the home. A full cleaning and overhaul is done at the workshop with the movement removed from the case.
How long does a grandfather clock repair take?
An in-home adjustment takes an hour or two. A movement overhaul usually takes several weeks, depending on the clockmaker's backlog and on parts.
Should I move a grandfather clock to a shop?
Usually not. Moving the whole clock risks the case and the movement. Clockmakers who do house calls remove only the movement when bench work is needed.
