What clock do I have?
Answer a few questions to jump to your clock type.
See every path
Does it stand on the floor, hang on the wall or sit on a shelf?
- Floor
Is it taller than about 6 feet with a long pendulum and weights?
- Wall
Does a bird pop out, with pine-cone weights on chains?
- Shelf / table
Is there a glass dome and a pendulum that turns instead of swinging?
Grandfather (tall-case) clocks
A tall floor-standing case, usually 6 to 8 feet, with a long pendulum and one to three weights. Shorter versions are called grandmother clocks. Most are eight-day clocks wound weekly by crank (cables) or by pulling chains. Modern ones usually chime Westminster on rods or tubes; antique ones often strike the hour on a bell.
Repairs to expect: beat and setup after moves, chime synchronisation, cable replacement, movement cleaning every several years.
546 clockmakers in our directory mention grandfather clock work. Find one.
Mantel and shelf clocks
Spring-driven clocks for a mantelpiece or shelf, wound with a key through the dial. One winding hole means time only, two add an hour strike, three add a quarter chime. American shelf clocks, “tambour” (camel-back) mantel clocks and French marble clocks all belong here; table and bracket clocks are close relatives.
Repairs to expect: mainspring replacement, cleaning, beat setting after a move, strike and chime adjustment.
294 clockmakers in our directory mention mantel and shelf clocks. Find one.
Wall, regulator and pendulum clocks
Vienna regulators with long glazed cases, schoolhouse clocks, banjo clocks and many kitchen clocks. They can be weight- or spring-driven. A pendulum wall clock must hang straight and be fixed so it can't move, or it will stop.
Repairs to expect: beat setting, suspension springs, gut lines or cables on weight-driven regulators, movement cleaning.
315 clockmakers in our directory mention wall and regulator clocks. Find one.
Cuckoo clocks
Black Forest clocks with a carved or chalet-style case, a bird that appears on the hour, bellows and pipes that make the call, and pine-cone weights on chains. One-day movements need daily winding; eight-day movements weekly. Some also play music.
Repairs to expect: bellows, chains and sprockets, beat, movement cleaning or replacement with an identical modern movement.
333 clockmakers in our directory mention cuckoo clocks. Find one.
Atmos and anniversary clocks
Atmos clocks, made by Jaeger-LeCoultre, wind themselves from small changes in air temperature and have a torsion pendulum that turns slowly instead of swinging. Anniversary or 400-day clocks also have a torsion pendulum under a glass dome but are wound by key, about once a year.
Repairs to expect: these are specialist clocks. Lock the pendulum before moving an Atmos and never oil it; ask the clockmaker whether they service Atmos clocks before booking.
102 clockmakers in our directory mention Atmos and anniversary clocks. Find one.
Carriage clocks
Small brass travel clocks with glass panels and a top handle, made in large numbers in France from the 19th century. Many have a platform escapement (a balance wheel instead of a pendulum), and some strike or repeat the hour on demand.
Repairs to expect: platform escapement service, mainsprings, glass replacement.
Antique and vintage mechanical clocks
“Antique” usually means about 100 years or older; “vintage” is used loosely for mid-20th-century clocks. What matters for repair is the movement: hand-made antique movements need a specialist who can make parts, while mass-produced vintage movements often have parts or replacements available.
Quartz (battery) clocks
Battery clocks with a sealed quartz movement. They aren't repaired in the usual sense: when the movement fails, it is replaced. A clock shop can match the shaft length and hands so the clock looks unchanged.
Clock types: common questions
How do I know what kind of clock I have?
Start with where it stands (floor, wall, shelf), how it is powered (weights, key, battery) and what it does (strikes, chimes, cuckoo). The tree above walks you through it.
What is the difference between a grandfather and a grandmother clock?
Size: grandmother clocks are shorter floor clocks, usually under about 6 feet. The movements are similar.
Can any clockmaker repair an Atmos clock?
No. Atmos clocks are specialist work; ask before booking whether the clockmaker services them.
