Mantel clocks are spring-driven: one, two or three mainsprings wound with a key through the dial. They travel well, so they are normally taken to the shop rather than repaired at home.
How to tell what is wrong
Count the winding holes in the dial. One hole: time only. Two: time and strike. Three: time, strike and chime (often Westminster). Each hole winds one spring and one part of the clock, so if only the chime stops, the problem is usually in that train.
- Won't wind or winds forever: broken mainspring or click.
- Runs a day or two instead of eight: spring power not reaching the pendulum (dirty or worn movement).
- Stops when moved to a new shelf: out of beat for the new surface.
- Chime plays slowly or stops: chime train needs cleaning and oiling.
Safety note about mainsprings
A wound mainspring stores a lot of energy. Taking a spring-driven movement apart without letting the springs down with the right tool can injure you and damage the clock. This is the main reason mantel clock movements should be opened by a clockmaker.
Clockmakers who do this
294 listings in 44 states mention mantel and shelf clocks on their website, in their name or in customer reviews. States with the most:
What a mantel clock service includes
- Letting down and removing the mainsprings; cleaning or replacing them
- Cleaning and bushing the movement
- Checking the suspension spring and pendulum
- Setting the strike or chime to match the hands
- Test running before return
Transporting a mantel clock
Take off the pendulum (on most clocks it lifts off a hook behind a small door at the back) and pack it separately. Let the clock run down if you can. Wrap the clock in a blanket and carry it upright.
Questions
Should I fully wind my mantel clock?
Yes, wind until the key stops turning with firm but gentle pressure, once a week for an eight-day clock. Overwinding is a myth; a clock that won't run when fully wound usually needs cleaning.
Why does my mantel clock stop after I move it?
The new shelf may not be level, which puts the clock out of beat. Try shimming one side until the tick is even.
