Clock problems & care

Clock Repair GuidesPlain-English help before you call a clockmaker

Clocks that stop, chime wrong, run fast or slow; how to clean, oil, maintain and move them. What usually causes each problem, what you can safely check and when to call a professional.

Clock stopped? Find the cause

Four quick questions; the result links to the right guide.

See every path

Is it a battery (quartz) clock or a wind-up mechanical clock?

  • Battery

    Have you tried a fresh, good-quality battery the right way round?

    • Yes, still dead → The quartz movement has probably failed. Movements are cheap to replace and a clock shop can fit one that matches the hands.
    • No → Start there: weak batteries cause most quartz stoppages, and alkaline cells can leak and corrode the contacts.
  • Wind-up / weights

    Is it fully wound (springs) or are the weights pulled up?

    • Yes

      Listen: are the tick and the tock evenly spaced?

      • Even

        Are the hands touching each other, the glass or the dial?

        • Yes → Gently ease the minute hand away from the hour hand or tighten its nut. Hands that touch can stop the clock every day at the same time.
        • No

          When you start the pendulum, does it keep swinging for hours?

          • Stops within minutes → Check the pendulum is hooked on the suspension spring and the crutch. If it is, the movement is not delivering power: it needs cleaning and service.
          • Runs for hours or days, then stops → The movement is losing power as it unwinds, typical of dirty oil and worn pivots. Book a cleaning.
      • Uneven / limping → The clock is out of beat. Level the case first; if it is level, the beat needs setting (see the pendulum guide).
    • No / not sure → Wind it fully. A clock that runs a few minutes after winding and stops again is a beat or movement problem: answer again after winding.

Something is wrong

Advertisement

Care & maintenance