Grandfather clocks need very little from their owners: regular winding, a stable spot away from heat and drafts, and a professional service every several years. Most damage comes from well-meant extras like household oil, polish on the movement or moving the clock with the weights on.
Every week
- Wind all weights on the same day each week, slowly, stopping before the weights touch the top.
- Wind with the crank on cable clocks; pull chains straight down on chain clocks, supporting the weight with your other hand.
- Glance at the cables: they should wind neatly in their grooves.
Placement
- A solid floor, the case level and if possible against a wall so it can't rock.
- Away from radiators, heating vents, fireplaces and direct sun, which dry out wood and oil.
- Not where doors slam or children can swing on the door.
Every year
- Dust the case with a soft cloth; furniture polish on the wood only, never on the movement, dial or brass weights.
- Check that the case is still level (floors move) and that the beat is even.
- Wipe the weight shells and pendulum with a dry cotton glove; fingerprints tarnish lacquered brass.
Professional service
Oil is the part owners shouldn't handle. Clockmakers commonly recommend oiling every few years and a full cleaning roughly every eight to ten years in daily use. Details are in our guide on how often to service a grandfather clock.
Going away or storing the clock
For a holiday, let the clock run down or stop the pendulum. For long storage or a move, the weights and pendulum must come off and the chime rods or tubes secured; see how to move a grandfather clock.
Questions
Should I let my grandfather clock run down?
It does no harm to let a clock stop now and then, but weekly winding keeps the timekeeping steady.
Can I polish the brass weights?
Most modern weight shells and pendulums are lacquered. Polishing removes the lacquer; dust them with a soft dry cloth instead.
